HANUKKAH paint stencil
✓ Cut-checked479 × 90 mmIntermediate
This paint stencil spells HANUKKAH for holiday signs, banners and menorah backdrops. Cut it from mylar stencil film, cardstock or paper. It suits anyone making Hanukkah decor.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 479 × 90 mm (18.9 × 3.5 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Intermediate
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use on wood for a holiday sign
- Use on fabric for a banner with fabric paint
- Pair with blue and silver paints for a festive look
How to make it
Use on wood or fabric. Blue and silver paints work well. For fabric, use fabric paint and heat-set after drying. Stencil may need careful alignment for long words.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 3.87 mm | 7.36 mm |
| Cardstock (stencil) | CO₂ laser | 8.23 mm | 7.50 mm |
| Cardstock / paper | Diode laser | 3.88 mm | 7.36 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The design measures 479 x 90 mm (18.9 x 3.5 in) and is one piece.
What materials and machines is it checked for?
It was checked for mylar stencil film (0.25 mm), cardstock (stencil) and cardstock/paper on a CO₂ laser or diode laser.
How do I use it on fabric?
Use fabric paint and heat-set after drying.
What file formats are included?
SVG and DXF.
