HELLO KITCHEN paint stencil
✓ Cut-checked467 × 57 mmBeginner
This HELLO KITCHEN stencil is made for painting the greeting above a sink, countertop, or kitchen sign. It cuts as one piece from Mylar or cardstock. The design suits makers who want a cheerful kitchen accent.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 467 × 57 mm (18.4 × 2.2 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil onto a painted wall above the sink
- Use on a wood board for a countertop sign
- Paint onto a canvas for kitchen wall art
How to make it
Use on a painted wall or wood board. Tape stencil flat, dab with a stencil brush, and remove while paint is still wet for clean lines.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 1.79 mm | 7.71 mm |
| Cardstock (stencil) | CO₂ laser | 1.59 mm | 7.95 mm |
| Cardstock / paper | Diode laser | 1.79 mm | 7.71 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the stencil?
The stencil measures 467 x 57 mm (18.4 x 2.2 in).
What materials and machines can I use?
It was checked for Mylar stencil film (0.25mm), Cardstock (stencil), and Cardstock / paper. It works with CO₂ and diode lasers.
How many pieces does it cut into and what file formats are included?
It cuts as 1 piece. You get SVG and DXF files.
