Lotus mandala clock face, 320 mm
This lotus mandala design works as a clock face with a center hole for a quartz movement. At 316 x 313 mm, it suits advanced makers who want a minimal wall clock for a living room or office.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 316 × 313 mm (12.4 × 12.3 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Advanced
- Fits
- CO₂ 600 × 400
Ideas
- Hang in a living room as a focal point
- Give as a housewarming gift
- Paint or stain to match any decor
How to make it
Cut from 3mm plywood. Sand and paint or stain. Install quartz clock movement through center hole (7mm). The center hole cuts at 7 mm; drill it out to 8 mm (5/16") for a standard quartz clock movement (sold separately).
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 7.89 mm | 5.03 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 7.89 mm | 5.03 mm |
| 3mm Acrylic | CO₂ laser | 7.91 mm | 4.99 mm |
| 3mm MDF | CO₂ laser | 7.96 mm | 5.04 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 316 x 313 mm (12.4 x 12.3 in).
What materials can I use?
It was checked for 3mm Birch Plywood, 3mm Hardwood (walnut, maple, cherry), 3mm Acrylic, and 3mm MDF.
What machines and file formats are supported?
It fits CO₂ 600 × 400 beds and comes in SVG and DXF formats. The difficulty is advanced.
