OFFICE paint stencil
The OFFICE paint stencil gives a clean label for a home office door or wall. Cut it from mylar stencil film or cardstock and paint with a roller for large areas. It suits a minimal or industrial space.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 418 × 182 mm (16.4 × 7.2 in)
- Pieces
- 1
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Stencil on a home office door
- Mark a wall above a desk
- Paint onto a canvas sign
How to make it
Stencil onto a door or canvas. Use a level to keep text straight. Paint with a roller for large areas.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| Mylar stencil film (0.25mm) | CO₂ laser | 6.86 mm | 22.15 mm |
| Cardstock (stencil) | CO₂ laser | 6.70 mm | 22.35 mm |
| Cardstock / paper | Diode laser | 6.85 mm | 22.15 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The stencil measures 418 x 182 mm (16.4 x 7.2 in).
What materials and machines does it work with?
It was checked for mylar stencil film (0.25mm), cardstock (stencil) and cardstock/paper. It works with CO₂ and diode lasers including Glowforge, OMTech 50 W, xTool P2 / P2S and CO₂ 600 × 400 beds.
Can I change the text in the editor?
No, the design opens in the editor as shown with no text fields to change.
