Scallop ceiling medallion, 300 mm
✓ Cut-checked295 × 294 mmAdvanced
This is a scallop-pattern ceiling medallion for light fixtures. You make an elegant rosette that goes around a ceiling light base. It suits homeowners or DIYers who want a classic accent for a living room.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 295 × 294 mm (11.6 × 11.6 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Advanced
- Fits
- OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Install around a ceiling light fixture
- Prime and paint to match the ceiling
- Use as a housewarming gift
How to make it
Cut from 3mm MDF. Prime and paint. Install around ceiling light base using center hole for wires.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm MDF | CO₂ laser | 6.97 mm | 5.00 mm |
| 3mm Birch Plywood | CO₂ laser | 6.92 mm | 5.03 mm |
| 3mm Acrylic | CO₂ laser | 6.95 mm | 4.99 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 295 x 294 mm (11.6 x 11.6 in).
What materials and machines work?
It was checked for 3mm MDF, 3mm Birch Plywood, and 3mm Acrylic. Use a CO₂ laser with a bed that fits OMTech 50 W, xTool P2 / P2S, or CO₂ 600 × 400.
Can I change the text?
No, the design opens in the editor as shown. There is no text to personalize.
