Scallop coaster set of 4, 120 mm
✓ Cut-checked112 × 114 mmBeginner
This is a set of four scallop rosette coasters, each 120 mm. You make coasters from cork, plywood, or felt. It suits anyone who wants a quick laser project for a kitchen or table.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 112 × 114 mm (4.4 × 4.5 in)
- Machines
- CO₂ laser, Diode laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use as coasters for drinks
- Give as a housewarming gift
- Stack as a trivet for hot dishes
How to make it
Cut from cork sheet. No finishing needed. Use as is.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Cork sheet | CO₂ laser | 6.89 mm | 7.89 mm |
| 3mm Birch Plywood | CO₂ laser | 6.92 mm | 7.95 mm |
| 2mm Cork sheet | Diode laser | 6.92 mm | 7.95 mm |
| 3mm Wool felt | CO₂ laser | 6.91 mm | 7.95 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
Each coaster is 112 x 114 mm (4.4 x 4.5 in).
What materials and machines work?
It was checked for 3mm Cork sheet, 3mm Birch Plywood, 2mm Cork sheet, and 3mm Wool felt. Use a CO₂ laser or diode laser with a bed that fits K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, or CO₂ 600 × 400.
Can I change the text?
No, the design opens in the editor as shown. There is no text to personalize.
