Star filigree trivet, 180 mm
✓ Cut-checked171 × 169 mmBeginner
This pointed star-burst trivet has filigree dots for a modern look. It measures 180 mm and suits geometric or minimal style. Good for family and friends as a housewarming gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 171 × 169 mm (6.7 × 6.6 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use as a trivet for hot dishes
- Display on a kitchen counter
- Give as a housewarming gift
How to make it
Peel protective film. Use as a trivet for hot dishes. Clean with soft cloth.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Acrylic | CO₂ laser | 4.77 mm | 4.88 mm |
| 6mm Acrylic | CO₂ laser | 4.76 mm | 4.85 mm |
| 3mm Birch Plywood | CO₂ laser | 4.77 mm | 4.87 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Units are millimetres, 1:1 · Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
The design is 171 x 169 mm (6.7 x 6.6 in).
What materials and machines can I use?
It was checked for 3mm Acrylic, 6mm Acrylic, and 3mm Birch Plywood. It works with CO₂ lasers only.
What file formats are included?
You get SVG and DXF files. The design is beginner-level and opens in the editor as shown.
