Layered woven mandala coaster, 100 mm
This set of 4 layered woven mandala coasters is each 100 mm across with 3 layers. They are cut from 3 mm plywood and work well for everyday use or as a housewarming gift. Suits family and friends who like geometric, minimal decor.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 94 × 94 mm (3.7 × 3.7 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use on a kitchen or dining table
- Give as a housewarming gift
- Seal with a clear coat for drink protection
How to make it
Cut from 3 mm cork or ply, glue the layers together (no backing needed). Seal with a clear coat for drink protection.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 2.98 mm | 1.26 mm |
| 3mm MDF | CO₂ laser | 2.98 mm | 1.39 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the design?
Each coaster is 94 x 94 mm (3.7 x 3.7 in).
What materials and machines does it work with?
It was checked for 3mm Birch Plywood and 3mm MDF. It is for CO₂ lasers and fits K40-class CO₂, Glowforge (Basic/Plus/Pro), OMTech 50 W, xTool P2 / P2S, and CO₂ 600 × 400 beds.
What is the difficulty and file format?
Difficulty is beginner. Files come as SVG and DXF.
