Layered woven mandala coaster, 120 mm
This layered woven mandala coaster set has 8 folds and a basket band. It includes a backing and is made from two layers of 3 mm material. It suits anyone who wants a minimal mandala coaster for everyday use or as a housewarming gift.
Free accounts download draft files; full-precision files come with Maker, coming soon.
- Size
- 113 × 113 mm (4.5 × 4.5 in)
- Machines
- CO₂ laser
- Files
- SVG and DXF, in millimetres
- Skill
- Beginner
- Fits
- K40-class CO₂ · Glowforge (Basic/Plus/Pro) · OMTech 50 W · xTool P2 / P2S · CO₂ 600 × 400
Ideas
- Use as a drink coaster on a coffee table
- Give as a housewarming gift with a set of mugs
- Finish with food-safe mineral oil for kitchen use
How to make it
Cut coasters from 3 mm plywood; apply a food-safe finish like mineral oil or polyurethane. Glue the two layers together; let dry before using.
Checked for these materials
| Material | Machine | Thinnest strip | Narrowest opening |
|---|---|---|---|
| 3mm Birch Plywood | CO₂ laser | 3.47 mm | 1.14 mm |
| 3mm Acrylic | CO₂ laser | 3.46 mm | 1.13 mm |
| 3mm Hardwood (walnut, maple, cherry) | CO₂ laser | 3.47 mm | 1.14 mm |
Measured on the exact cut lines for each material, after kerf.
Quality checks
- ✓Passed: Every cut path is closed, no zero-length segments · No duplicate or stacked cut lines · No cut lines cross or touch · Curves aren't over-segmented · Thinnest strip of material ≥ the material's minimum · Narrowest opening ≥ what the machine cuts cleanly · Pieces come out as designed (nothing falls loose) · The generator raised no warnings · Fits a common machine bed.
Questions
What size is the finished coaster?
The design measures 113 x 113 mm (4.5 x 4.5 in).
What materials can I use?
It was checked for 3 mm birch plywood, 3 mm acrylic, and 3 mm hardwood such as walnut, maple, or cherry.
Which machines and file formats are supported?
It works with CO₂ lasers that fit a K40-class, Glowforge, OMTech 50 W, xTool P2 / P2S, or CO₂ 600 x 400 bed. You get SVG and DXF files.
